Babes posing with the VIP rides by Junction Produce
Junction Produce Fusa / Kitsuna
Junction Produce Kiku Knot
Junction Produce Brake system kit
|
|
|---|
VOLTAGE STABILIZER & GROUNDING CABLE EFFECTIVE?
Additional info by KDI for example pivot raizin voltage stabilizer. Is it effective?:
Product Description
* RAIZIN Volt Stabilizer 82%. (Blue)
* Improved audio quality.
* Increased torque and response and power.
* Stabilized idling and improved engine kick over.
* Increased headlight brightness.
* Improved fuel economy.
* Improved battery.
* Our special condenser and original circuitry design bring you voltage stability.
* A blue LED helps you identify any possible wiring mistakes. (Even with the key off, the LED only uses 0.5mA of power)
* Internal duel fuses prevent any possible accident.
* Heat resistant (to 125ºC) case will not change shape.
* Circuitry has waterproof coating. (But do not to install in areas. Subject to water or spray with water)
Made in Japan.
1 YEAR WARRANTY
Original With 1.5 and “K” Marking
How Power Door Locks Work?
Power locks or electric locks allow the doors of a vehicle to be locked or unlocked automatically. A keyless entry remote control using a key fob can enable a user to activate the door locks from a short range outside the vehicle. The basic system components include: lock actuator, switches, wiring and a circuit breaker. Voltage is sent to the actuator by using a control switch which is connected to the 12 volt power source of the car through a circuit breaker.
Door Lock Actuator
In some cases a body controller is used in conjunction with the door lock system. The body controller can unlock and lock doors when a correct condition exist such as lock the doors after 2 minutes of driving. Most actuators are normally located below the door latch of the car or are manufactured as part of the door latch. When the door is unlocked the actuator is supplied with power which excites an electrical coil, electromagnetism supplies the force to actuate the door latch.
Door Lock Actuator (cutaway)
Some actuators are manufactured with an electric motor and a gear set is used to move a control rod to activate door lock. A series of gears act as a gear reduction to move a rack and pinion flat gear. The motor can be driven in both directions depending on the use of the switch to lock and unlock the door latch.
Source by: http://www.2carpros.com/how_does_it_work/power_locks.htm
In some cases a body controller is used in conjunction with the door lock system. The body controller can unlock and lock doors when a correct condition exist such as lock the doors after 2 minutes of driving. Most actuators are normally located below the door latch of the car or are manufactured as part of the door latch. When the door is unlocked the actuator is supplied with power which excites an electrical coil, electromagnetism supplies the force to actuate the door latch.
Some actuators are manufactured with an electric motor and a gear set is used to move a control rod to activate door lock. A series of gears act as a gear reduction to move a rack and pinion flat gear. The motor can be driven in both directions depending on the use of the switch to lock and unlock the door latch.
Source by: http://www.2carpros.com/how_does_it_work/power_locks.htm
VIP Style Toyota Alphard
Below are some shoots I'm posting up for the VIP style Toyota Alphard. It's such nice and descent car and with just a lil bit of styling, it turns out to be really VIP and luxurious. Enjoy the shoots there yeah.
Subscribe to:
Posts (Atom)
